Korg DSS-1 - Page 221

Volume
• Break point level:
Sets the level at which the decay time ends.
• Slope time:
Controls how long it takes for the envelope voltage to
change from the break point level to the sustain level.
The greater the value, the more gradual the volume
change (assuming that there is a ditference in level
between break point and sustain).
i
}
t M s
' i \ \
* I k N
I I
Decay time
Volume
high break point
level value.
Low break point
level value
-------- -* Time
i.
i
i
t
i
Small slope lime value
I
Large slope time
value.
Sustain level
— Time
• Sustain level:
Sets the (voltage) level at which the slope time ends.
• Release time:
Determines how long it takes for the sound to fade
away after you release a key. The greater the value,
the more gradually the volume will be attenuated.
(This assumes that the sustain level is high enough
so that there will be a change).
Volume
/ 's
i '
\ S
*
I. \
Volume
— V -
i— ;
Slope time
/
High sustain level
Low sustain level.
Time
2. Using the VGA EG Function
■ Press 3 then 8, or use DATA EN TRY A to select the
function.
■ Use the cursor keys to select a parameter. Use
DATA ENTRY B to adjust its value.
Display for the VGA EG function,
i
Attack time
Decay lime. Slope time.
Break point level. Sustain level.
release time,
221
PROGRAM PARAMETER MODE