Korg Grandstage X - Page 74

Grandstage X - System settings
74
Post-MIDI: Transposes and applies the velocity curve to data before it enters the sound generator.
This setting does not have an effect when playing the Grandstage X’s own sounds using this key-
board.
The default setting is “Pre-MIDI”.
→ Applying transpose and velocity curve settings to MIDI
MIDI channel settings (MIDI ch)
Specifies the MIDI channels on which the Grandstage X will transmit and receive (from 1–16).
The default setting is “1”.
→ MIDI channel settings (MIDI ch)
MIDI channel mode (MIDI ch mode)
This selects the MIDI channel mode used by the Grandstage X to transmit and receive MIDI data.
Global: Uses only the channels set in “MIDI ch”. When you play with layer or split mode programs, this
keyboard transmits and receives on only one channel.
Indiv. (Individual): Uses the respective channels set in “MIDI ch”, “Layer Part ch” and “Split Part ch”
to transmit/receive MIDI signals for the MAIN, LAYER and SPLIT parts.
The default setting is “Global”.
LAYER and SPLIT part MIDI channel settings (Layer Part ch, Split Part ch)
This setting is enabled when MIDI ch mode is set to “Indiv.”. Specifies the MIDI channels (1–16) for the
LAYER and SPLIT parts of the Grandstage X.
→ MIDI channel settings (MIDI ch)
The default settings are “2” for the LAYER part and “3” for the SPLIT part.
Note: Specify the MIDI channel for the MAIN part in “MIDI ch”.
Save options for the RHYTHM section parameters (Rhythm)
This sets whether to save the RHYTHM section parameters as a favorite or as global parameters for
the Grandstage X.
Save options for the KEY TOUCH section parameters (Key Touch)
This sets whether to save the KEY TOUCH section parameters as a favorite or as global parameters
for the Grandstage X.
When saving as a favorite, the key touch settings can be saved separately for each favorite. For exam-
ple, you can create two favorites that use the same sound. One of the favorites can be set for playing
louder at a stable level, and the other can be set for playing over a wide dynamic range (from a loud
fortissimo down to a delicate pianissimo). In this way, you can select the favorite you want according
to the genre you’re playing.
Save options for the EQUALIZER section parameters (EQ)
This sets whether to save the EQUALIZER section parameters as a favorite or as global parameters
for the Grandstage X.
Save options for the ANALOG TONE section parameters (Analog Tone)
This sets whether to save the ANALOG TONE section parameters as a favorite or as global parame-
ters for the Grandstage X.
Save options for the AUDIO IN section parameters (Audio In)
This sets whether to save the AUDIO IN section parameters as a favorite or as global parameters for
the Grandstage X.