49
Style Play operating mode
Page 20 - Style controls: Drum/Fill
Note value for the Trill, Repeat or Echo Ensemble
options. This is in sync with the Metronome Tempo.
Feedback
Note: This parameter only appears when the Echo option is
selected.
This parameter sets how many times the original note/
chord is repeated by the Echo option.
PAGE 20 - STYLE CONTROLS: DRUM/FILL
In this page you can select various general parameters
for the Style.
V1–V4 Drum Map
The Drum Mapping lets you select an alternative
arrangement of percussive instruments for the selected
Drum Kit, without any additional programming. Just
select a Drum Map, and some percussive instruments
will be replaced with different instruments.
0…7 Drum Map number. Number 0 is the stan-
dard mapping.
Kick D(esignation)
The Kick Designation replaces the original Kick (Bass
Drum) sound with a different Kick of the same Drum
Kit.
Off, 1…3 Kick replacing the original one. Off corre-
sponds to the original Kick.
Snare D(esignation)
The Snare Designation replaces the original Snare
Drum sound with a different Snare of the same Drum
Kit.
Off, 1…3 Snare replacing the original one. Off corre-
sponds to the original Snare.
Fill1/2
These parameters set a Variation to be automatically
selected at the end of the Fill.
Off The same Variation, playing before select-
ing a Fill, will be selected again.
1&2…3&4 The specified Variations will be alterna-
tively selected. For example, with the
“1&2” option, Variation 1 and Variation 2
will be alternatively selected after the end
of the Fill.
Up/Down The next higher/lower numbered Varia-
tion is selected, in cycle. After Variation 4,
an Up command will select Variation 1.
After Variation 1, a Down command will
select Variation 4.
Inc/Dec The next higher/lower numbered Varia-
tion is selected. When Variation 4 is
reached, an Inc command will select Vari-
ation 4 again. When Variation 1 is reached,
a Dec command will select Variation 1
again.
->1…->4 “Fill to Variation” (->1, ->2, ->3, ->4) auto-
matically selects one of the four available
Style Variations at the end of the fill.
PAGE 21 - STYLE CONTROLS:
WRAP AROUND / KEYBOARD RANGE
In this page you can program the Wrap Around func-
tion and the Keyboard Range for the Style tracks.
Here is the edit procedure:
1. Use the VOLUME/VALUE (A–H) buttons to select
a parameter.
2. Use the F-1–F-4 buttons to move the cursor
between the parameter and its status or value.
3. Use the TEMPO/VALUE controls to change the
parameter’s status or value.
Prog (Program)
This parameter lets you select a different Program,
other than the one recorded into the Style Element
(Variations, Fills, Intros, Endings).
Note: This parameter is automatically set to On each time
you assign a Program to any of the Style tracks, either from
the front panel or via MIDI.
Original Style tracks always use the original Pro-
grams. If you assign a different Program
to a Style track, it may be reset to the orig-
inal one when selecting a different Style
Element.
On You can assign different Programs to each
Style track, and save them in a Perfor-
mance or Style Performance. This becomes
the only track’s Program for all Style Ele-
ments.
To Next Page
Loading...
