Korg Pitchblack XS - Korg Pitchblack XS Connections; DC 9 V IN Jack Connection; Input Jack Connection; Bypass Jack Connection

3
Parts of the Pitchblack XS
Connections
Turn o the power of all devices before you make any connections to avoid
damaging your equipment.
e INPUT and BYPASS jacks are mono. Stereo (TRS) cables will not work.
DC 9 V IN jack
Connect a separately sold AC adapter (9 V,
) here. Using an AC adapter
other than what Korg recommends may cause a malfunction or damage.
INPUT jack
Connect a cable from your instrument to the INPUT jack of the tuner. e power
turns on when you connect a cable to the INPUT jack, and the reference pitch
setting blinks in the note name display for several seconds. Connecting a cable to
the INPUT jack will turn the power on, but the tuner will not be in tuner mode.
Press the TUNER ON/OFF switch to engage tuner mode.
BYPASS jack
Connect a cable from the BYPASS jack to your other eect pedals or amp.
When the tuner is switched on, the signal from the INPUT jack will be muted for
silent tuning.
Signal is output from this jack while the tuner is o.
DC 9V IN jack
AC adapter (9V, ,
600 mA or greater,
sold separately)
DISPLAY/BRIGHT button
CALIB button
TUNER ON/OFF
switch
BUFFERED/TRUE BYPASS switch
INPUT jack
(mono)
BYPASS jack (mono)
Guitar, etc.
Eect pedal,
guitar amp,
or mixer etc.
Tuning guide LEDs
Note name display
Tuning LED
meter