7
4: Mirror
Tune your instrument until the LED at the center of the LED meter lights up
brightly.
e larger the pitch variation, the more that the LEDs towards either side light
up.
3. When you nish making the setting, wait for about two seconds without
pressing any buttons.
e note name display blinks twice to indicate that the display mode has been
set. e Pitchblack XS will automatically return to tuner mode.
Tip: e display mode settings will be preserved even if you remove the AC
adapter.
BRIGHT mode (brightness) settings
is sets the brightness (in two levels) of the display. e indicator is set to a
brighter setting by factory default.
1. Hold down the DISPLAY/BRIGHT button.
e brightness of the display will change. e Pitchblack XS will automatically
return to tuner mode.
Tip: e bright mode settings will be preserved even if you remove the AC
adapter.
The pitch
is sharp.
In tune.
The pitch
is at.