13
1. PEDAL button 2. MIDI/SYS button
11. SYSTEM
1. PEDAL button
Press this buon to specify the
seings for the optional foot
controller that’s (sold separately)
connected to the CONTROL
PEDAL jack on the rear panel.
See page 19 “Using a connected
pedal”.
2. MIDI/SYS button
Press this buon to specify MIDI
seings and global seings for
the SDD-3000 PEDAL and to
perform a bulk dump.
See page 22 “MIDI and System
seings”.
12. DUCKING
When the input sound is loud,
the volume of the eect can
be automatically decreased to
emphasize the original sound.
While holding down the MIDI/
SYS buon, turn the INTENSITY
knob in the MODULATION
section to adjust the seing.