Korg SDD-3000 PEDAL - Main Features of the SDD-3000 PEDAL

6
Thank you for purchasing the KORG SDD-3000 PEDAL Programmable Digital Delay.
To take full advantage of this product and to ensure trouble-free operation, please read this
owner’s manual carefully and use the product as directed.
Main features of the KORG SDD-3000 PEDAL
1
Recreates the original circuit of the SDD-3000, which was released in 1982.
2
Select from eight types of delay effects, such as SDD-3000 modeling, KOSMIC for
producing fantastic sounds, and a reverse delay.
3
Wide range of delay times, from 1 msec to a long delay with a maximum of 4,000 msec
4
Save up to a total of 80 programs (40 banks×2 channels).
5
Select from five basic modulation waveforms (sine wave, triangle, square, random
and envelope). Additionally, create waveforms that combine two different types, and
then make fine adjustments to the waveform.
6
Create special effects such as: flanger, chorus, vibrato, doubler and Doppler effects.
7
Using the built-in filters, change the sound quality of the delay, and set the tone
from clear to soft and mild.
8
MIDI IN and MIDI OUT/THRU jacks allow program change messages to be received
from external devices and a bulk dump of program data to be performed.
9
By using an optional foot controller, multiple effect parameters can be controlled
simultaneously.
10
The L/C/R function widens the output by dividing it among the left, right and center
channels with the press of a button.
The SDD-3000 PEDAL is equipped with an Auto Power-Off function that automatically
turns off the power (low-power consumption mode) when the unit hasn’t been used
for 4 hours. The Auto Power-Off function is enabled as the factory default.