Korona 12113 - Setting the Timer

Instruction Manual

23
Always disconnect the appliance from the mains if you
are not using it!
Setting the Timer
If you wish to enjoy your coffee at a specific time, you
need to set the timer to the desired time setting.
1. Follow the steps as described under Brewing Coffee
ProgTIMER” starts flashing
and 12:00 (default setting) will appear on the display.
Hour
Min

will no longer be shown on the display
Prog” button (9) again to confirm the setting.
The greenProg” button turns on.

displayed on the LCD display until the desired time has been
reached.
6. Once the desired time has been reached, the green
Prog” button (9) turns off, the
appliance switches on automatically and the brewing
cycle starts. This is indicated by the red indicator light of

Prog”
button (9) and the green indicator light goes off.