EN - 11 -
Tips for saving energy
1– Install the appliance in a cool, well ventilated room , but not in direct sunlight and
not near heat source (radiator, cooker.. etc. ). Otherwise use an insulating plate.
2– Allow warm food and drinks to cool down outside the appliance.
3– W hen placing, drinks and liquids they must be covered. Otherwise humidity
increases at the appliance. Therefore the working time gets longer. Also covering
drinks and liquids helps preserve the smell and taste.
4– When placing food and drinks, open the appliance door as briefly as possible.
5– Keep the covers closed of any different temperature compartment in the appliance
(crisper, chiller ...etc. ).
6– Door gasket must be clean and pliable. Replace gaskets if worn.
To Next Page
Loading...