EN
24
BEFORE USING THE APPLIANCE
General warnings
WARNING: Keep ventilation openings, in the appliance
enclosure or in the built-in structure, clear of obstruction.
WARNING: Do not use mechanical devices or other
means to accelerate the defrosting process, other than
those recommended by the manufacturer.
WARNING: Do not use electrical appliances inside the
food storage compartments of the appliance, unless they
are of the type recommended by the manufacturer.
WARNING: Do not damage the refrigerant circuit.
WARNING: In order to avoid any hazards resulting from
the instability of the appliance, it must be xed in accor-
dance with the following instructions:
WARNING: When positioning the appliance, ensure the
supply cord is not trapped or damaged.
WARNING: Do not locate multiple portable socket-out-
lets or portable power supplies at the rear of the appliance
Symbol ISO 7010 W021
Warning; Risk of re / ammable materials
• If your appliance uses R600a as a refrigerant (this
information will be provided on the label of the cooler) you
should take care during transportation and installation
to prevent the cooler elements from being damaged.
R600a is an environmentally friendly and natural gas,
but it is explosive. In the event of a leak due to damage
of the cooler elements, move your fridge away from open
ames or heat sources and ventilate the room where the
appliance is located for a few minutes.
• While carrying and positioning the fridge, do not damage
the cooler gas circuit.
To Next Page
Loading...
