6
1. Being a stationary type, install
the pump firmly at the required
spot. The mounting feet are to
be fastened by four bolts (8mm).
2. When installing the pump upon
the fuel tank, install the pump
above the tank. Installing the
pump underneath the tank not
advisable due to natural flow of
liquid by a siphon action.
3. Install the pump horizontally.
Being a self priming pump
requiring the liquid to be
invariably present in the pump,
installing it aslant may cause the
liquid in the pump to become
insufficient and the pump may
fail to demonstrate its self
priming action.
4. Be sure to raise the end of the
delivery hose and delivery pipe
from the level of the lifted liquid.
When the end of discharge hose
or the pipe is in the liquid, the
siphon action drains the liquid
from the pump and the pump will
fail to demonstrate the
self-priming action.
HOW TO MOUNT THE PUMP
6
To Next Page
Loading...
Need help?
General
