Koyo DirectLogic DL205 - DL205 System Diagrams

DL205 User Manual, 5th Edition
1-5
Chapter 1: Getting Started
DL205 System Diagrams
The diagram below shows the major components and configurations of the DL205 system.
The next two pages show specific components for building your system.
Getting Started
Networking
RS232C
(max. 50ft /16.2 m)
RS232C
(max. 50ft/16.2 m)
(max.
6.5 ft / 2m)
Handheld Programmer
Operator Interface
Programming or
Computer Interface
Simple Motion Control
Flexible solutions in one package
High-speed counting (up to 100kHz)
Pulse train output (up to 50kHz
High–speed Edge timing
Machine
Control
Packaging
Conveyors
Elevators
Programming or
Computer Interface
RS232C
(max. 50ft /16.2 m)
Handheld
Programmer
D2-240
RS232/422
Converter
RS232/422
Converter
Simple programming
through the RLL Program
D2-260 or D2-262 CPU with
H2–CTRIO(2) High Speed I/O Module
D2-240
D2-250-1,
D2-260 or D2-262
DL305
Pulse
Output
Drive
Amplifier
Stepper Motor
Local I/O Expansion
DCM