Need help?Do you have a question about the Kozyard Cozy Rocking Love Seat Bench Glider and is the answer not in the manual?
General| Brand | Kozyard |
|---|---|
| Model | Cozy Rocking Love Seat Bench Glider |
| Category | Indoor Furnishing |
| Language | English |
Position the right arm upside down on a protected flat surface for assembly.
Connect the seat to the right arm using a flat washer and short bolt, without full tightening.
Secure the left arm to the seat with a flat washer and short bolt, leaving bolts loose.
Rotate the partially assembled seat to an upright position for further assembly.
Attach the backrest to both arms using medium bolts and flat washers, keeping them loose.
Fasten the backrest to the seat with short bolts and flat washers, do not tighten fully.
Gently tilt the chair forward onto its front for easier access to attachment points.
Connect the glider support to the right arm using long bolts and two flat washers, loosely.
Repeat the process to attach the glider support to the left arm, leaving bolts un-tightened.
Secure the base to the glider support using long bolts and two flat washers, loosely.
Position the assembled glider upright on the floor, ensuring it stands squarely.
Firmly tighten all previously installed bolts using the provided Allen wrench.
Keep the Allen wrench for future periodic bolt tightening and maintenance.
Attach the seat cushion with ties, followed by placing the back cushions.
To Next Page
