KRAFT KF-CE07 - Page 52

52
SPLIT-TYPE ROOM AIR CONDITIONER
USER GUIDE



ATTENTION: It is similar to set TIMER OFF, you can make the appliance switch o
automatically at your desired time.



 
 
 

 

ATTENTION: In cooling mode, if room temperature is 26C or above, set temperature will
not change(invalid for some models).
ATTENTION: Heating is NOT available for cooling only air conditioner.
ATTENTION: Press SUPER ,SMART, MODE,SLEEP or FAN button cancel SLEEP mode.

 
              


 
 


ATTENTION:
• SMART button is not available in SUPER mode.
• The Appliance will continue working in SUPER mode , if you don't escape from it by
pressing any of the buttons mentioned above.
• Heating is NOT available for cooling only air conditioner.
• For the rst generation of products, you can’t set temperature in super mode, but you
can press TEMPERATURE SETTING button to escape super mode.