FC-70R Quick Start (P/N: 2900-300611QS REV 1)
FC-70R Quick Start Guide
This guide helps you install and use your FC-70R for the first time.
Go to www.kramerav.com/downloads/FC-70R to download the latest user manual and check if firmware
upgrades are available.
Step 1: Check what’s in the box
FC-70R RS-232 to USB Converter
Step 2: Get to know your FC-70R
Connects to a control device
Connects to and receives power from a KVM or KVM combiner being controlled
Lights when the device is powered on
Connects to a USB keyboard
Step 3: Install the FC-70R
Attach the rubber feet and place on a table or mount the FC-70R in a rack (using an optional RK-3T rack mount).
A Kramer TOOLS™ can also be mounted on a desk top, wall or similar area. Fasten a bracket on each side of the TOOLS
using the two M3x8 screws (supplied). Use the flat-head screws (supplied) to fix the TOOLS to the mounting surface or
enable it to slide in place.
To Next Page
Need help?
General
