Kramer K-Bar

3. Place the K-Bar onto the display.
4. Press the handle against the rear side of the display to
ensure that the bracket is tightly secured.
• Before moving the display, take care to remove the Camera Bracket to prevent the K-Bar from falling.
• Once installed, do not move the bracket to the sides or push it in any way.
• Ensure that the environment (e.g., maximum ambient temperature & air flow) is compatible for the device.
• Avoid uneven mechanical loading.
• Reliable earthing of rack-mounted equipment should be maintained.
Technical Specifications
Environmental
Conditions
Operating Temperature
0° to +40°C (32° to 104°F)
Storage Temperature
-40° to +70°C (-40° to 158°F)
Humidity
10% to 90%, RHL non-condensing
Regulatory
Compliance
Safety
CE
Environmental
RoHs, WEEE
Enclosure
Type
Aluminum
General
Net Dimensions (W, D, H)
15.9cm x 14.2cm x 1.3cm (6.3" x 5.6" x 0.5")
Shipping Dimensions (W, D, H)
17.5cm x 14.7cm x 2.5cm (6.9" x 5.8" x 1")
Net Weight
0.28kg (0.6lbs) approx.
Shipping Weight
0.33kg (0.7lbs) approx.
Specifications are subject to change without notice at www.kramerav.com