4. Click PROCEED. The web page refreshes, and the password fields are visible.
Security is enabled and access requires authentication.
Disabling User Access
To enable security:
1. In the Navigation pane, click Device Settings. The General tab in the Device Settings
page appears (see Figure 18).
2. Select Users tab (see Figure 25).
Figure 27: Device Settings – Users Tab
3. Click Off next to Security Status to enable web page authentication. The following
message appears.
Figure 28: Security Tab – Security Status
4. Enter the current password.
5. Click PROCEED.
Security is disabled.
To Next Page
Loading...
Need help?
General
