Need help?Do you have a question about the Kraus KGW-1700 and is the answer not in the manual?
General| Sink Type | Vessel |
|---|---|
| Overflow | No |
| Hole Count | 1 |
| Installation Type | Deck Mounted |
| Aerator | Yes |
| Flow Rate | 1.2 GPM |
| WaterSense Certified | Yes |
| ADA Compliant | Yes |
| Type | Single Hole Faucet |
| Material | Brass |
| Handle Type | Lever |
Remove mounting hardware (6A, B, C, & D) from the mounting pipe.
Remove decorative ring (1) from faucet body (5).
Install glass disc (2) on faucet body (5) and secure with decorative ring (1).
Insert faucet body (1) into countertop hole and attach mounting hardware from underneath.
Adjust faucet body (5) direction and tighten mounting nut (6C) and screws (6D).
Connect hot and cold waterlines (7) to angle stops and check for leaks.
Turn water on for a minute to ensure proper water flow.
List and diagram of available replacement parts for the faucet.
Common issues with causes and corrective actions for faucet problems.
Applicable codes and standards for the faucet, including NSF and UPC certifications.
Contact information for Kraus USA for homeowners, contractors, and partners.
Guidelines for cleaning and maintaining the faucet to keep it clean and shining.
Instructions to register the product online for proof of ownership and customer care.
To Next Page
