Need help?Do you have a question about the Kraus KPF-1630 and is the answer not in the manual?
General| Brand | Kraus |
|---|---|
| Model | KPF-1630 |
| Category | Plumbing Product |
| Language | English |
Remove mounting screws, nut, and washer from the mounting pipe.
For three-hole installation, deck plate, base plate, and silicone sealant are required.
For single-hole installation, deck plate and base plate are not required.
Insert faucet body into countertop hole or deck plate assembly and install mounting hardware.
Adjust faucet direction and tighten mounting nut and screws until snug.
Connect spray hose to check valve and install weight on spray hose.
Connect waterlines to hot and cold copper lines and angle stops. Check for leaks.
Remove spray head, hold hose tip, and run water for 60 seconds to flush debris.
Inspect all connections for leaks and retighten if necessary.
To Next Page