The Kraus Automatic Sensor Trash Can, model KTCS-10, is a modern and convenient solution for waste disposal, designed with user-friendly features and an emphasis on hygiene. This sensor-activated trash can offers a touchless operation, making it ideal for various household environments where cleanliness and ease of use are paramount.

Function Description:

The primary function of the Kraus Automatic Sensor Trash Can is to provide a hygienic and convenient method for waste disposal through its automatic sensing capabilities. The lid of the trash can is equipped with an induction zone and screen, which detects objects or body parts within a range of approximately 10-15cm. Upon detection, the lid automatically opens, allowing for touchless disposal of waste. Once the object or body part leaves the sensing area, a 5-second countdown is displayed on the screen, after which the lid automatically closes. This automatic operation minimizes direct contact with the trash can, contributing to a more sanitary environment.

In addition to the automatic sensing function, the trash can also features a touch switch for manual control of the lid. Pressing the OPEN/CLOSE button on the screen will keep the lid in the open position. Pressing it again will close the lid. If the OPEN/CLOSE button is pressed to open the lid, and no objects are sensed, the lid will automatically close after 5 seconds. This dual functionality provides flexibility, allowing users to choose between automatic and manual operation based on their preference or specific needs.

The trash can is powered by 3 AA batteries, which are installed in a dedicated battery case located within the lid. Once the batteries are correctly installed according to the polarity instructions ("+" and "-"), the power switch, located on the backside of the lid, needs to be set to "I" to activate the automatic sensor system.

Usage Features:

The Kraus Automatic Sensor Trash Can is designed for straightforward and efficient use.

Touchless Operation: The most prominent feature is its automatic sensor, which allows the lid to open and close without physical contact. This is particularly beneficial in kitchens or other areas where hands may be full or dirty, promoting a more hygienic experience.
Manual Control: The inclusion of a touch switch provides an alternative to the automatic sensor. Users can manually open and close the lid, or keep it open for extended periods, which can be useful during food preparation or when disposing of larger amounts of waste.
Easy Battery Installation: The battery case is easily accessible within the lid, simplifying the process of installing or replacing the 3 AA batteries required for operation. Clear polarity instructions ensure correct installation.
Trash Bag Securing System: The trash can incorporates a practical system for securing trash bags. It features orange handles that are part of a Bag Securing Unit. To install a trash bag, users first select their preferred bag and place it inside the trash can. Then, they raise the orange handles, wrap the lip of the trash bag around them, and finally lower the handles to secure the bag in place before replacing the lid. This system helps prevent the trash bag from slipping down into the can and keeps it neatly in position.
Inner Barrel Design: For stainless steel bins, an ECO-Friendly Plastic Inner Barrel is included, which helps contain waste and makes cleaning easier.
Anti-skid Pedestal: The base of the trash can features an anti-skid design, ensuring stability and preventing the can from sliding on various floor surfaces.

Maintenance Features:

Maintaining the Kraus Automatic Sensor Trash Can is crucial for its longevity and optimal performance.

Cleaning: Regular cleaning is recommended using a clean cloth. It is important to avoid using excessive water on the trash bin, as water can damage the internal electrical components. The manual specifically warns against powering on the device if water has entered the trash bin. Harsh cleaning agents such as abrasive cleaners (powders, bleach, ammonia, alcohol, or chlorine) and abrasive pads (steel wool, wire brushes) should be avoided as they can damage the finish and void the warranty.
Battery Replacement: Timely replacement of batteries is essential to prevent liquid leakage, which can damage the electric elements of the sensor system. The manual advises against mixing acidic and alkaline batteries, or rechargeable and disposable batteries. If the lid opens slowly, it is an indication that the batteries may be low and need replacement.
Sensor Area Maintenance: Keeping the induction zone and screen clean is vital for the proper functioning of the automatic sensor. Any dirt or obstruction in this area can impair the sensor's ability to detect objects, leading to issues with the lid opening or closing.
Structural Care: Users are advised not to push or flip the lid forcefully, as this can cause damage to the lid mechanism.
Environmental Considerations: The trash can should not be used under direct sunlight or in wet surroundings, as these conditions can negatively impact its performance and lifespan.
Packaging Support Removal: Upon initial setup, it is crucial to remove the four black plastic packaging supports from the interior of the trash container. These supports are solely for preventing distortion during transit and, if left in place, can decrease the trash can's capacity or shred trash bags.
No Self-Repair: The manual explicitly states that users should not attempt to repair the trash bin or replace parts themselves, as doing so will void the warranty. For any issues, contacting customer service is recommended.

Kraus KTCS-10 - Diagram and Parts List