Kraus Sellette KPF-1683SFS User Manual

9
Step 4. Attach spray hose and counterweight
Step 5. Connect waterlines
Connect spray hose (5)
to quick connector (7)
attached to supply line.
Install weight (6) on lowest
vertical point on spray
hose (5).
Connect waterlines (8) to angle
stops. Tighten both ends of
waterlines with a wrench
until snug. Turn on hot and
cold angle stops and check
for leaks.
7
5
6
8
NOTE: Make sure filter
washers are installed.

Kraus Sellette KPF-1683SFS Specifications

General

Brand	Kraus
Model	Sellette KPF-1683SFS
Category	Kitchen & Bath Fixtures
Language	English