Krautkramer DM4E - 4.3 Switching the instrument on and off

Page 30 DM4E, DM4, DM4 DL Operating Manual
Reading exceeds HI Alarm limit
(DM4, DM4 DL)
Section 2.11
Reading less than LO Alarm limit
(DM4, DM4 DL)
Section 2.11
Differential measurement mode
(DM4, DM4 DL)
Section 2.12
Differential reading exceeds
nominal by amount shown.
(DM4, DM4 DL)
Section 2.12
Differential reading less than
nominal amount shown.
(DM4, DM4 DL)
Section 2.12
Band Pass Filter control
(DM4, DM4 DL)
Section 2.13
Memory clear
Section 3.2 (DM4 DL)
File no. 1 empty
File no. 1 empty
Section 3.3 (DM4 DL
Appendix A: Displays, Quick Reference
File no. nnn active
Section 3.3 (DM4 DL)
File no. 1 full
Section 3.3 (DM4 DL)
Location no. 5 full
Section 3.5 (DM4 DL
All files selected
Ready to transmit or clear
Sections 3.3, 3.9, 4.4, 4.5
(DM4 DL)
Viewing “obstructed” location
Sections 3.4.1, 3.6 (DM4 DL)
Viewing empty location
Section 3.6 (DM4 DL) or unable to
measure in the Dual Multi mode
Section 2.18.
Location no. 5 empty
Section 3.5 (DM4 DL)
Location no. 5 active
SEND confirmed
Section 3.4 (DM4 DL)