7
English
CHARGE aTUNE
(3.7V rechargeable built-in battery)
1. Connect aTUNE to a USB-C cable and plug the USB-C cable to a USB
socket.
2. Battery volume on the LCD display blinks during charging. It stops
blinking after fully charged.
GETTING STARTED
1. Unclip the antenna and fully extend it.
2. Long press POWER button to turn on aTUNE.
3. It will go to DAB mode as default to search for DAB stations and play the
1st one after search.
4. Time will be synchronized automatically after receiving DAB radio
stations.
INTRODUCTION OF OPERATION BUTTONS
1. Power button/Volume knob:
• Longpresstoturnonoro.
• Short press to go in and out of standby mode.
• Volume knob: Adjust volume.
2. SOURCE: Switch between DAB+/FM/Bluetooth.
3. SELECT:
• Press SELECT to choose menu option.
• Bluetooth mode: Long press to enter pairing mode. Short press to
play/pause.
To Next Page
Loading...
Need help?
General