Need help?Do you have a question about the KREBS K25T and is the answer not in the manual?
General| Type | Airless Paint Sprayer |
|---|---|
| Power Source | Electric |
| Max Flow Rate | 2.5 L/min |
| Max Pressure | 250 bar |
| Hose Length | 15 m |
Prepare paint, varnish, or spray material for optimal application by adjusting viscosity.
Dispose of paints, varnishes, and solvents according to relevant regulations and manufacturer instructions.
Prepare the spraying area, surface, and material for optimal results before spraying.
Adjust the spray jet for optimal cone and atomization by turning the regulating knob.
Execute the spraying process, ensuring consistent application, overlap, and avoiding emptying the container.
Choose the correct nozzle type and size for different paints and desired spray patterns.
Step-by-step guide to disassembling the pump for cleaning or repair.
Reassemble the pump parts in the correct reverse order after cleaning.
To Next Page
