Krix Apex - Brix

Frequency Range 75Hz-20kHzinroomresponse
Power Handling Maximum60wattsRMSamplierpower
Sensitivity 87dBfor2.83voltsat1metre
Conguration 4inch2-way
Bass Driver Fibrereinforcedmouldedpolymerbasket 
withanominal100mm(4”)doped
papercone.25mm(1”)voicecoil
woundonhighpoweredaluminiumformer.
Doublemagnetshielded
Tweeter 25mm(1”)fabricdome.Ferrouidcooled 
Neodymiummagnet
Crossover Point 3kHz
Impedance Nominally6ohms
Enclosure Type Bassreex,rearvented
Dimensions 230mmhighx150mmwidex190mmdeep
Material 12mmMDF
Finish Vinylorlacqueredtimberveneer
Volume 3litresinternal
Weight 3kgeach
Mounting Provisionsmadeforbracketmounting
7
Brixisdesignedtobesmallinsizeyetbiginsound,deliveringdetailedaccuracy
andstunningclarity.Versatileforanyapplication,fromcompactstereospeakers,
rearchannelspeakersinyoursurroundsoundsystemorforuseinasecond
zone,Brixareideal.Thetwo-waybassreexdesign
featuresa25mmtextiledometweeteranda100mm
diameterbassdriver.Brixisalittlespeakerthatwilloffer
adynamicexperience.
“What was simply stunning was the stereo imaging that’s
possible with the Brix, particularly if you stand-mount
them around a metre out from a rear wall. With some
careful positioning, we were rewarded with sound that
was almost headphone-like in its spatial treatment of the
two channels.” –AustralianHi-Fi