Krix Tektonix - Page 9

9
advanced connection methods
one subwoofer - stereo connection
If your receiver has a stereo L & R subwoofer
output feature, connect both L & R outputs to
your subwoofers L & R line inputs.
Main AV Receiver
From L & R sub-outs
Tektonix or Volcanix
Main AV Receiver
From L & R sub-outs
left subwoofer right subwoofer
Main AV Receiver
From sub-out(mono)
subwoofer one subwoofer two
two (or more) subwoofers - mono connection
Using multiple subwoofers can be useful in
large or troublesome installations where more
uniform bass coverage is desired. If your
receiver has only one subwoofer output, use a
RCA Y-connector to connect both subwoofer
L/LFE inputs to the one mono SUB output.
left and right subwoofers - stereo connection
If your receiver has stereo line level subwoofer
outputs a left and right subwoofer may be used
to allow stereo low bass reproduction.
Connect each receiver sub output to the
corresponding subwoofer:
L sub out to the left subwoofer L/LFE input
R sub out to right subwoofer L/LFE input