Krone 4XL-RGD - Scrapers

VI - 10
Maintenance
KDW0635
0
1
2
3
y
x
4
KLW0903
0
1
6.10 Scrapers
The scrapers are located on the conveyor
drum at the front of the storage area.
• Check the backs of the scrapers (1) for wear after each
season and replace if necessary.
6.10.1 Distance cutters to drum
KDW0404
0
1
2
The distance between the blades and the
drum is set at the factory to the correct
value and must not be varied.
6.9.3 Metering device
The drive chain of the metering rollers is at the rear left of
the wagon behind the cover.
Spring length under tension (upper chain (2)- lower chain
tensioner (4)) X= 60 mm
Spring length under tension (lower chain (3)- upper chain
tensioner (2)) Y= 60 mm