Krone Big M II - Function Area Navigation; Settings Menu

IV - 5
Warning Devices and Monitors
The menu key (1) is used to access and close the main
menu
The individual menu entries are:
F1 = Settings
F2 = Meters
F3 = Manual operation
F4 = Service
called up using the function keys F1 - F4.
4.6.1 (F1) Settings
The settings are accessed using the function keys:
F1 = Set overcut
F2 = Select time/distance control (lift or lower all mowers)
F3 = Fine adjustment of the selected function (for F2)
F4 = Next page
4.6 Function Area
4.6.1.1(F1) Set overcut
Display in cm
= Increase overcut
= Decrease overcut
= Accept value and exit screen
ES
C
= Discard change and exit screen
4.6.1.2(F2) Select time/distance control
= Distance control (lift / lower mowers)
= Time control (lift / lower mowers)
BMII-157
F1
F2
F3
F4
1
BMII-158
F1
F2
F3
F4
BMII-159
F1
F2
F3
F4
BMII-158
F1
F2
F3
F4