Krone Big M II - Set Overcut Function; Time;Distance Control

IV - 6
Warning Devices and Monitors
BMII-160
F1
F2
F3
F4
BMII-161
F1
F2
F3
F4
BMII-162
F1
F2
F3
F4
4.6.1.3(F3) Fine adjustment of the selected
function (F2)
The (F3) function key is used for fine adjustment of the
time/distance control.
Time control:
= Increase/decrease time interval for lifting all
mowers
= Increase/decrease time interval for lowering all
mowers
= Accept value and exit screen
ES
C
= Discard change and exit screen
Distance control:
= Increase/decrease distance for lifting all
mowers
= Increase/decrease distance for lowering all
mowers
= Accept value and exit screen
ES
C
= Discard change and exit screen
4.6.1.4(F4) Next page
The settings are accessed using the function keys:
4.6.1.5(F1) Auger monitoring
F1 = Auger monitoring turned on
Auger monitoring turned off
4.6.1.6(F2) Select (US _ GB / Metric)
F2 = Select Metric
Select US / GB
4.6.1.7(F3) Select language
F3 = Select language
F4 = Previous page