VI - 4
Cabin
6.10 Steering Wheel Height and Tilt
Adjustment
Unlocking pedal (1) = horizontal and vertical steering
column adjustment
Unlocking lever (2) = vertical steering column adjustment
The steering column is held in the upright position by
spring pressure. Therefore hold the steering wheel securely
with both hands before pressing the pedal (1).
Unlock the steering column with the pedal (1) and move
it to the desired position. The steering column will be
locked when you release the pedal (1).
Loosen unlocking lever (2). Set steering wheel to the
position desired, then re-tighten unlocking lever (2).
Only adjust the steering column when the
machine has been shut down.
Adjust the sun blind according to requirements.
For driving on roads.
For road safety reasons, the brake
pedals must always be coupled by
moving the locking lever (A).
No individual wheel brake available
Before the start of every trip check the
brake function.
BMII-196
1
6.11 Parking Brake
6.12 Sun Blind
BMII-213
1
2
To Next Page
Loading...
