IX - 6
Driving and Transport
Set the road safety switch to Road position. (Position
II)
BMII-025
9.12 Emergencey Disengagement of
the Parking Brake
Only tow out of the danger area.
Never tow over long distances.
The spring is located at the spring storage cylinder below
the front apron.
If the machine does not build up the oil pressure fir disen-
gaging the parking brake, the parking brake can be disen-
gaged manually. To do this the spring (1) must be set to
Block.
Loosen nuts (2).
Set spring (1) to Block.
Tighten nuts (2) fix by locknut.