X - 2
Mowers
The protective canvas (1) must be tightened each time
before using the mower so that it cannot be caught by the
auger of the conditioner.
The disc mowers are designed for forwards
travel. If the road safety switch is in field
position, the mowers are automatically
lifted out during reversing.
10.2.1 Special Safety Instructions
10.2.2 Guards on the Mowers
Fold down the side plates (1) before
operation.
Check the safety guards (2,3) regularly.
Replace worn or damaged safety guards.
The protective equipment on the mowers,
e.g. guards and guard plates, protects
against flying stones and similar objects as
well as prevents dangerous parts being
accessed.
SFM0429
2
1
3
3
1
2
10.2 Adjusting the Mowers
Maintenance, cleaning and repair work should be done only when the machine is at a
standstill. Switch off the engine, remove the ignition key. Secure the machine from rolling
away.
After completing maintenance work reattach all protective devices properly. Avoid skin
contact with oil and grease. Contact a doctor immediately if injuries are caused by escap-
ing oil.
The cutter blades can continue to rotate after the drive has been switched off.
Only approach the machine once the work tools have come to a complete standstill!
To Next Page
Loading...
