Krone Big Pack 890 HS - Menu 1-2 Knotter Signal

KRONE ISOBUS-Terminal CCI 100
107
Pos: 24.57 /BA/Inf o-Center/CC-ISOBUS- Terminal/CCI-Bi G Pack/Hauptmenüs/Haupt menü 1 Einstellungen/ Menü 1-2 „Knotersignal“ @ 44\ mod_1275314987500_ 78.doc @ 390934
7.10.2 Menu 1-2 „Knotter signal“
CC000055
1-2
CC000030
1-2
2/2
Fig. 66
Activation/deactivation of the audio signal when a knot has been completed.
Calling the menu
Main menu 1 “Settings” is displayed.
• You can select menu 1-2
with the function key or . The symbol is shown in
reverse colors
• Press function key
The display shows menu 1-2 "Knotter signal".
The current status is displayed as a symbol:
= Knotter signal activated
= Knotter signal deactivated
The symbol
in the upper line indicates that the displayed status is saved.
Change and save status
• Set the status with the function key
or in a way that the symbol in the top line
goes out
• Press the function key
. The set status is saved and the symbol appears in the
upper line
• Pressing the function key
closes the called up menu
• Pressing the function key
and holding it down brings up the basic screen
Pos: 24.58 /BA/-----Seitenumbruch------ @ 0\mod_1196175311226_ 0.doc @ 4165