VIII - 29
Settings
When it is unfolded, the bale chute represents an
extension of the baling channel. For big bales to be set
down on the ground correctly, the back edge of the
baling chute must not be too high above the ground.
Otherwise the bales will be damaged when they are
placed on the ground.
BPXC0208
2
1
8.9 Adjusting the Baling Chute
BPXC0214
2
• The inclination of the baling chute to the ground can
be sued to adjust the length of the support chain (2)
of the baling chute.
• To do this, adjust the nut (1) on either side of the
baling channel.
To Next Page
Loading...
