IV - 31
Comfort Control Unit
4.9.13 Main Menu 4 “Service”
Calling the main menu
• Call the main menu with the
key.
• You can select main menu 4
with the
rotary potentiometer. The icon is shown in reverse
colours.
• Press the rotary potentiometer.
The display shows menu level 4 “Service”.
Menu level 4 “Service” is divided into two menus:
• = menu 4-2 “Sensor test, manual”
• = menu 4-4 “Actuator test, manual”
• = menu 4-5 “Current alarms”
4.9.14 Menu 4-2 “Sensor test, manual”
In the manual sensor test, the sensors are checked
for errors. In addition, the sensor type can be
correctly adjusted in the manual sensor test.
There is no guarantee the machine is working
correctly until after the sensors have been adjusted.
The PTO must not be turning during
the sensor test.
Calling the menu
Main menu 4 “Service” is displayed.
• You can select menu 4-2 with the rotary
potentiometer. The icon is shown in reverse
colours.
• Press the rotary potentiometer.
The display shows menu 4-2 “Sensor test, manual”.
Selecting the sensor
• Select the sensor with the rotary potentiometer.
The selected sensor is shown in reverse colours and
is tested.
To Next Page
Loading...
