V - 3
Medium Control Unit
Electrical power supply
When installing, take care that the
connecting cables are not stretched
and cannot come in contact with the
tractor wheels.
• Connect the power supply cable (12 V) on the
tractor side to the 3-prong power outlet (DIN 9680)
and on the machine side with the Delphi plug (5).
• The Delphi plug (5) is located on the left-hand side
of the machine (in the direction of travel) on the
metal cover close to the flywheel.
BPM50022
2
3
Control unit
• Connect the cable included with delivery to the
socket (4) on the metal cover on the left-hand side
(in the direction of travel) close to the flywheel. Also
connect with the socket (3) of the control unit.
BPK40659
5
4
To Next Page
Loading...
