Krone Big Pack 890 XC - Checking;Adjusting Sensor B22 Bale on Chute

Terminal – Menus [Medium/Comfort Version Electronics]
202
Pos: 103.179 /BA/I nfo-Center/CC I-ISOBUS-Ter minal/CCI-BiG Pack/Haupt menüs/Hauptme nü 1 Einstellu ngen/Menü 5-2 „ Korrekturwert für Feuchtemessu ng“ @ 368\m od_144163397 1850_78.docx @ 2700221 @ 3 @ 1
16.10.2 Menu 5-2 "Correction value for moisture measurement"
In this menu a correction value can be set for the moisture measurement if the displayed value
deviates from the value of an external measuring system.
CC000099
CC000141
2
1
Fig.
121
Menu 5 "Moisture measurement" has been selected, see chapter Terminal – Menus, "Menu 5
'Moisture measurement'".
• To open the menu, press .
The display shows the "Correction value for moisture measurement" menu.
Display area
Graphic
Designation
Explanation
(1)
Value
Measured moisture
(2)
Correction value
Adjustable value range: +10 to -10
Determining the moisture
• Use an external system to determine the moisture.
If the measured value matches the value (1) on the display, everything is correct.
If the measured value does not match the value (1) on the display, correct the value on the
display.
Setting the correction value
• Press or until the value (1) matches the measured value.
The symbol goes out.
• To save the value, press .
The symbol is displayed.
The value is saved.
Pos: 103.180 /BA/I nfo-Center/CC I-ISOBUS-Ter minal/Menüs b edienen/Wi ederkehrende Sym bole_Ver weis @ 354\mod _1438323278518_ 78.docx @ 26 48185 @ @ 1
Recurring symbols
• See chapter Terminal – Menus, "Recurring symbols".
Pos: 103.181 /La yout Module /---------------Seitenumbruch---------------- @ 0\mod_119 6175311226_0. docx @ 4165 @ @ 1