Krone Big Pack 890 XC - Page 478

8 Terminal – machine functions [Medium Plus/Comfort Plus Electronics]
8.3 Displays on the working screen
34
Supplement to Operating Instructions 150000773_00_en
BiG Pack 1270, BiG Pack 1270 XC, BiG Pack 1290, BiG Pack 1290 HDP, BiG Pack 1290 HDP XC, BiG Pack
1290 XC, BiG Pack 890, BiG Pack 890 XC
8.3 Displays on the working screen
20
4 cm
108 bar
94 / 240 cm
EQG000-028
The available icons comply with the equipment of the machine. The following represented icons
are not always available.
Icon Designation Explanation
Current baling force as % • In manual mode.
• Maximum 100 %.
Current bale channel flap
pressure
• In automatic mode.
• In bar or PSI (depending on selected
system of units).
Current number of layers of
the last compressed bale
Current layer thickness • In cm or inch (depending on selected
system of units).
Direction display • The arrows (left/right) indicate to the
driver the side he/she should correct
towards and by how much when driving
over the swath to ensure that the bale
chamber is evenly filled.
• Up to 3 arrows can be displayed.
• 1 arrow: Low change in direction
required.
• 3 flashing arrows: Greater change in
direction required.
• The direction display can be set, refer
to page57