Terminal – menus [Medium Plus/Comfort Plus Electronics] 9
Bring up menu level 9.3
Supplement to Operating Instructions 150000773_00_en
BiG Pack 1270, BiG Pack 1270 XC, BiG Pack 1290, BiG Pack 1290 HDP, BiG Pack 1290 HDP XC, BiG Pack
1290 XC, BiG Pack 890, BiG Pack 890 XC
49
Icon Designation Explanation
Arrow pointing to the left Move to the left in order to select
something.
Disk Save the setting.
ESC Leave menu without saving.
By pressing the key longer, the previously
viewed working screen is called up.
DEF Reset to factory setting.
Sensor test Quick access to sensor test (sensors
relevant for this menu)
Actuator test Quick access to actuator test (actuators
relevant for this menu)
Disk The mode or value is saved.
Plus Increase the value.
Minus Reduce the value.
Arrow pointing to the right Display next mode.
Arrow pointing to the right Display previous mode.
9.3 Bring up menu level
EQ001-002 / EQ001-003
To bring up the menu level from the working screen, press
.
Æ The display indicates the menu level.
Depending on how the machine is equipped, the menu level 4 is divided into the following
menus:
Icon Designation
Menu 1 "Knotter", refer to page52