9 Terminal – menus [Medium Plus/Comfort Plus Electronics]
9.7 Menu 1 "Knotter"
54
Supplement to Operating Instructions 150000773_00_en
BiG Pack 1270, BiG Pack 1270 XC, BiG Pack 1290, BiG Pack 1290 HDP, BiG Pack 1290 HDP XC, BiG Pack
1290 XC, BiG Pack 890, BiG Pack 890 XC
Display range
One of two modes can be selected:
Icon Designation Explanation
Mode 1/2
Knotter signal activated After a knot is tied, an acoustic signal
sounds.
Mode 2/2
Knotter signal deactivated After a knot is tied, an acoustic signal does
not sound.
Changing mode
Call up and save mode, refer to page52.
9.7.3 Menu 1-3 "Knotter monitoring"
For the "Comfort Electronics" version
This menu can be used to set whether the upper twines of the knotters are to be monitored. The
knotters are numbered from left to right as viewed in the direction of travel: Knotters from 1 to
6 .
EQ001-005 / EQ001-061
ü Menu 1 "Knotter" has been selected, refer to page52.
To open the menu, press
.
Æ The display shows the "Knotter monitoring" menu.
Recurring icons refer to page48.
Display range
One of two modes can be selected:
Icon Designation Explanation
Mode 1/2
Knotter monitoring
activated
The upper twines are individually
monitored.
Mode 2/2
Knotter monitoring
deactivated
The upper twines are not monitored.