Krone Big Pack 890 - Big Pack 1290;XC

I - 4
General Information
1.4.3 Big Pack 1290/XC
The technical data specified in the table
refer to the basic version of the machine
in each case. Deviations (e.g. due to
additional attachments, etc.) are not
included in this table.
*
1
Rigid
*
2
Guided coast-down
*
3
50 km/h with tandem axle braked
40 km/h with tandem axle unbraked
Big Pack 1290 Big Pack 1290 XC
Single-axle Tandem Single-axle Tandem
Permissible maximum speed 40 km/h 50km/h*
3
40 km/h 50km/h*
3
Length of working position (mm) 9180
Length of transport position (mm) 7930
Height (mm) 3075
Weight (kg) 7860 8230 9050 9420
500/50-17 500/50-17
Tyres 700/45-22.5 500/55-20 700/45-22.5 500/55-20
560/45R22.5 560/45R22.5
620/40 R22,5 620/40 R22,5
Width (mm) * 2995
Tyre pressure (bar) 1,5 2,4 bei 17" 1,5 2,4 bei 17"
1,8 bei 20"/22,5" 1,8 bei 20"/22,5"
Track width (mm) 2200 2250*
1
2350*
2
2200 2250*
1
2350*
2
Baling channel Height (mm) 900
Width (mm) 1200
Baling length (mm) from 1000 to 2700 (continuously adjustable)
Scattering width (mm) 2380
Number of knotter devices 6
Power requirement 90 KW (122 PS) 105 KW (143 PS)
Cutting system
(number of blades) -26
Friction clutch drive 1800 Nm
Flywheel overload coupling Wedge switch 4500 Nm
Pick-up overload coupling Star ratchet 800 Nm Star ratchet1000 Nm
Cam-type cut-out clutch for cutting
system - 7000 Nm
Packer overload coupling Cam-type cut-out clutch 14500 Nm
Needle connecting rod Shear screw M 10 x 55 DIN 931-10.9