IV - 27
Comfort Control Unit
4.9.9 Menu 1-7 "Unit of measure"
(for machines with electronic knotter triggering)
Switch the unit of measure from Metric to US or vice
versa.
Meaning of the icons:
Unit of measure Metric
Unit of measure US
Displaying the menu
Main menu 1 "Settings" appears
• You can select menu 1-7 with the rotary
potentiometer. The icon is shown in reverse video.
• Press the rotary potentiometer.
The display shows menu 1-7 "Unit of measure".
The icon in the upper line indicates that the
displayed status is saved.
• Press the key for softkey DEF. The factory
setting value is accepted. The icon in the
upper line may disappear.
• Set the desired unit of measure with the rotary
potentiometer. The icon in the top line
disappears.
• Press the rotary potentiometer. The set status is
saved and the icon appears in the upper line.
• You can use the key to close the menu that is
displayed.
The display shows menu level 1 "Setting".
• Pressing the key several times times brings up
the basic screen.
BPK40656
BPK40657
To Next Page
Loading...
