Krone BiG X 600-3 - To this Document; Validity; Re-Ordering; Further Applicable Documents

To this Document
14
2 To this Document
2.1 Validity
These operating instructions apply to the following machine types:
– Precision forage harvester BiG X 600-3
– Precision forage harvester BiG X 700-3
– Precision forage harvester BiG X 770-3
2.2 Re-Ordering
If this document has become unusable in whole or in part, you can order a replacement, quoting
the document number on the cover sheet. Contact data can be found in the chapter “Contact
persons”.
The document can additionally be downloaded via the KRONE Media Center
http://www.mediathek.krone.de//.
2.3 Further applicable documents
To ensure that the machine is used safely and as intended, observe the following further
applicable documents:
Component designation
Manufacturer
Document type
Diesel engine
Liebherr
Operating Instructions
Diesel engine
Liebherr
Consumable regulations
Diesel engine
Liebherr
Maintenance booklet
Electrical system
KRONE
Circuit Diagram
Spare parts
KRONE
Spare parts list
BIG X 600-3
BIG X 700-3
BIG X 770-3
2.4 Target group of this document
This document aims at the operators of the machine fulfilling the minimum requirements of
personnel qualification; refer to chapter entitled Safety “Personnel Qualification”.