WARNING! – Risk of injury and damage to the machine due to the cable winch!
Careless operation of the cable winch can result in injury and damage to the machine.
• Only connect the remote control when the cable winch is required.
• When working with the cable winch, always wear protective gloves.
• Each time before using the cable winch, check to make certain the mounting screws are
securely seated on the winch attachment plate.
• Check the wire rope of the cable winch and the connecting cable of the remote control for
damage prior to each and replace if necessary.
• When winding up the cable, make sure it is wound evenly on the drum.
• Always leave five revolutions on the winch drum for safety.
Fig. 346
Note
The remote control (1) can be found in the tool box upon delivery of the machine.
After use, store the remote control in the drawer beneath the driver's seat to prevent
unauthorised use.
To Next Page
Loading...
