Driving and Transport
543
17.14.1 Releasing the holding brake manually
Securing the machine against rolling away:
• Shut down and safeguard the machine, see chapter Safety, "Shutting down and
safeguarding the machine".
• Place the wheel chocks on the right and left, in front of or behind (depending on slope) the
wheels of the front axle.
Preparation
Fig. 483
• The parts set (1) consists of the pump lever and the connecting hose.
• The parts are stored in the lower right compartment of the tool box.
Release parking brake
Fig. 484
• Connect the Minimess hose from the tool box to the Minimess connection (1).
• Open the lever (3).
• Close the stop cock (4) underneath the valve block.
• Operate the hand pump (2) until hydraulic oil escapes from the Minimess hose free of
bubbles.
• Connect the Minimess hose to the Minimess coupling (5).
• Operate the hand pump (2) until the parking brake is fully released.
To Next Page
Loading...
