Control and Display Elements
126
7.4 Air comfort seat
Danger to life due to brief distraction of the driver!
If the driver adjusts the driver's seat while driving, he cannot pay adequate attention to his
driving and endangers people as a result.
• The driver’s seat must not be adjusted until the machine is at a standstill.
Risk of injury due to movement of the machine or machine parts!
If the control lever does not move freely in all directions, not all functions of the control lever can
be implemented. It may then not be possible to respond quickly and correctly to hazardous
situations.
• After adjusting the comfort seat, the right armrest and the steering column, check whether
the control lever can move freely in all directions.
• If the control lever does not move freely in all directions, adjust the setting.
Risk of injury due to incorrectly adjusted driver's seat!
If the driver's seat is not adjusted individually to the driver, the driver may damage his health
due to bad posture while working.
• Before starting up the machine, adjust the driver's seat ergonomically and individually to the
driver.
Risk of injury due to uncontrolled movement of the machine!
If the vibration damper has been set too softly, the seat may hit the floor when driving on a bad
road and contact with the controls is no longer guaranteed. It may then not be possible to
respond quickly and correctly to hazardous situations.
• Always set the vibration damper of the comfort seat tightly enough to prevent the seat from
hitting the floor even when driving on a bad road.
To Next Page
Loading...
