Control and Display Elements
135
Actuating the release switch
Every release switch (1) is assigned different functions in position I (initial position) and position
II (pressed).
Fig. 74 Example
The release switches (1) are locked against unintentional actuation.
• To unlock the release switch (1), push the lock (2) forwards and switch the release
switch (1) to the other position.
• Release the lock (2) to lock the release switch (1) in this position.
7.6.2 Functions of the release switches and keys
"Road/field" release switch
The release switch "road/field" must be in position "I" road mode when the machine travels on
the road.
This ensures that only the travelling gear, steering and brakes are activated.
Fig. 75
I Road mode
II Field mode
To Next Page
Loading...
