Control and Display Elements
136
Release switch "Intake/front attachment"
Actuating the "feed drive/front attachment" release switch releases the feed drive rollers and the
corresponding attachment.
Fig. 76
Prerequisite for switching on the feed drive/front attachment:
– The release switch road/field (2) is set to field mode (II).
I Feed drive/front attachment off
II Feed drive/front attachment on
"Parking brake" key
Fig. 77
• To manually apply or release the parking brake, press the key "Parking brake" (1)
repeatedly.
The status of the parking brake is shown in the display (drive data information section):
– The parking brake is engaged if the icon
appears in the display.
NOTE
The parking brake is released if the brake pedal and the parking brake momentary switch are
actuated simultaneously.
Automatic actuation of the parking brake:
– The parking brake is automatically applied if the driver's seat is not occupied.
– The parking brake is automatically applied when the diesel engine is switched off.
– The parking brake is automatically released when the machine starts.
To Next Page
Loading...
