Control and Display Elements
137
"Travelling gear" release switch
Actuate the release switch "traction drive" to release traction drive. The machine can only be
moved with the help of the multi-function lever following the release.
When the travelling gear is switched on, the maintenance functions for manual operation on the
left platform are not released.
Fig. 78
I Travelling gear on
II Travelling gear off
Traction control system switch
Traction control is a connectable traction control system which can be adjusted in two stages.
Fig. 79
• Pressing the TC switch (1) repeatedly switches the traction control system off or on.
• Pressing the "TC I/II" button (2) repeatedly allows you to switch between the sensitivity
levels.
The status of the traction control system is shown in the display see page 173
To Next Page
Loading...
