Krone BiG X 770-3 - Page 159

Control and Display Elements
159
Item
Control
Explanation
1
"Right counterblade towards" key
Moves the right counterblade towards the
chopping drum.
2
"Left counterblade towards" key
Moves the left counterblade towards the
chopping drum.
3
"Close grinding flap" key
The grinding flap closes.
4
"Open grinding flap" key
The grinding flap opens.
5
"Raise lifting unit" key
Raises the lifting unit (manual).
6
Quick-stop switch
Stops the working functions of the
machine. The diesel engine and the
travelling gear continue running.
7
"Lower lifting unit" key
Lowers the lifting unit (manual).
8
"Move grinding stone manually" key
Moves the grinding stone.
9
"Automatic grinding operation" key
Starts an automatic grinding process.
10
"Left counterblade away" key
Moves the left counterblade away from the
chopping drum.
11
"Right counterblade away" key
Moves the right counterblade away from
the chopping drum.
12
"Reversing feed drive/front attachment"
key
Reverses the feed drive/front attachment
To activate manual operation:
• Switch on the diesel engine.
• Release switch road/field in field mode
• Switch off the release switch traction drive.
• Switch on the maintenance release switch.
• Switch on the main coupling.